| Die in diesem Abschnitt gegebenen Empfehlungen basieren auf unseren Erfahrungen mit typischen Installationen, Applikationen und Anwendungen. Stellen Sie sicher, dass Sie das System wählen, das den besten Komfort im Vergleich zur Leistung bietet. Es liegt in der Verantwortung des Bootsherstellers und des Installateurs, sicherzustellen, dass die ausgewählten Komponenten auf dem Boot für einen sicheren und akzeptablen Betrieb ausreichend validiert sind. Verwenden Sie SeaStar Solutions Steering NICHT in Anwendungen, für die sie nicht bestimmt sind. | Outboard recommendations made in this section are based on our experience with typical installations, applications and usage. Ensure you select the system which provides the best comfort versus performance. It is the boat manufacturer and the installer’s responsibility to ensure the components selected are sufficiently validated on the boat for safe and acceptable operation. DO NOT use SeaStar Solutions Steering in applications they are not intended for. |
Laden Sie die Auswahlhilfe herunter
| ENGINE | SEASTAR FRONT MOUNT
(Normal Use – Refer to page 3-4 through 3-7 of the Hydraulic selection guide) |
SEASTAR TOURNAMENT SERIES
(Aggressive Use – See Note 1 – Refer to page 3-8 through 3-12 of the Hydraulic selection guide) |
| Single Engine | SINGLE CYLINDER
350HP Max 75 MPH Max HC53xx Cylinder (See Note 2) |
SINGLE CYLINDER
350HP Max HC63xx Cylinder (See Notes 2 & 3) or HC6845S |
| Dual Engine
Non-Counter Rotating |
SINGLE CYLINDER
450 HP Max 55 MPH Max HC53xx-3 Cylinder Ho60xx Tie Bar |
SINGLE CYLINDER
Tournament Cylinders (See page 3-11 through page 3-12) |
| DUAL CYLINDER
Tournament Cylinder HC53xx-3 Cylinder Ho60xx Tie Bar |
DUAL CYLINDER
Tournament Cylinders (See page 3-11 through page 3-12) |
|
| Dual Engine
Counter Rotating |
SINGLE CYLINDER
600HP Max, 55 MPH Max HC53xx Cylinder, HO60xx Tiebar |
SINGLE CYLINDER
Tournament Cylinders (See page 3-11 through page 3-12) |
| DUAL CYLINDER
600HP Max, 55 MPH Max HC53xx Cylinders, HO60xx Tiebar |
DUAL CYLINDER
Tournament Cylinders (See page 3-11 through page 3-12) |
|
| Triple Engine
One With Counter Rotating |
DUAL CYLINDER
55 MPH Max HC53xx-3 Cylinder Ho60xx Tie Bar *MAX center engine drop <.75″ |
DUAL CYLINDER
Tournament Cylinders See page 3-11 through page 3-12) |
| TRIPLE CYLINDER
900HP Max, 55 MPH Max HC53xx-3 Cylinders, HO60xx Tie Bar *MAX center engine drop <.75″ |
Consult SeaStar Solutions Technical Service |
NOTES
1. SeaStar Solutions® has specific steering equipment for boats that are driven aggressively, used in severe conditions or with more than 300 HP per engine.
2. ALL ENGINES over 300 HP and all boats that are driven aggressively must use a high strength tiller bolt, kit part #HA5822. All front mount cylinders built after June 15, 2007 will have this high strength bolt included in the box. High strength tiller bolts can be identified by the marking ‘SEASTAR ARP’ on the head of the bolt (refer to NOTICE on page 3-6).
3. HC63xx PRO Cylinders are designed for all those critical high speed, single outboard engine boats, such as Bass, Flats combo Race/Ski and other performance orientated boats capable of speeds in excess of 65 mph. For optimal performance, the use of SeaStar PRO helms and PRO Hoses are recommended
ORDER GUIDE (Normal Use)
| ENGINE/CYLINDER CONFIGURATION | DESCRIPTION | QTY. REQ. | MODEL | PART # |
| SINGLE ENGINE (Single Cylinder)
Applications up to 350HP Max. Number of Turns = 5
NOTICE: HC5345-3 is not compatible with all engines. Refer to Application Guides on page 3-5 to page 3-10 to ensure you have the correct cylinder for your application |
Cylinder | 1 | Front Mount | HC5345-3** |
| Helm | 1 | SeaStar* | HH5271-3 | |
| Hose Kit | 1 | Outboard Hose | HO51XX*** | |
| Oil | 3 | SeaStar Oil | HA5430 | |
| For Extra Steering Station Add: | ||||
| Helm | 1 | SeaStar* | HH5271-3 | |
| Fitting Kit | 1 | Add a Station | HF6007 | |
| Hose Kit | 1 | Outboard Hose | HO51XX | |
| Oil | 1 | SeaStar Oil | HA5430 | |
| DUAL ENGINE (Single Cylinder)
Non-Counter Rotating Applications up to 450HP Max. Counter Rotating Applications up to 600HP Max. Number of Turns = 5
|
Cylinder | 1 | Front Mount | HC5345-3** |
| Tie-Bar Kit | 1 | HO60XX** | ||
| Helm | 1 | SeaStar* | HH5271-3 | |
| Hose Kit | 1 | Outboard Hose | HO51XX** | |
| Oil | 3 | SeaStar Oil | HA5430 | |
| For Extra Steering Station Add: | ||||
| Helm | 1 | SeaStar* | HH5271-3 | |
| Fitting Kit | 1 | Add a Station | HF6007 | |
| Hose Kit | 1 | Outboard Hose | HO51XX** | |
| Oil | 1 | SeaStar Oil | HA5430 | |
| DUAL ENGINE (Dual Cylinders)
Non-Counter Rotating Applications up to 600HP Max. All Counter Rotating Applications up to 600HP Max Number of Turns = 6.5
|
Cylinder | 2 | Front Mount | HC5345-3** |
| Tie-Bar Kit | 1 | HO60XX** | ||
| Helm | 1 | SeaStar* | HH5272-3 | |
| Hose Kit | 3 | Outboard Hose | HO51XX** | |
| Fitting Kit | 1 | Tee Fittings | HF5530 | |
| Oil | 3 | SeaStar Oil | HA5430 | |
| For Extra Steering Station Add: | ||||
| Helm | 1 | SeaStar* | HH5272-3 | |
| Fitting Kit | 1 | Add a Station | HF6007 | |
| Hose Kit | 1 | Outboard Hose | HO51XX** | |
| Oil | 1 | SeaStar Oil | HA5430 | |
| OPTIONAL EQUIPMENT | Back Plate Kit (for Standard Helms) | HA5478 | ||
| 20 Degree Wedge (for Standard Helms) | HA5419 | |||
| Autopilot Fitting Kit (for all -3 Helms) | HF5501 | |||
| Power Assist steering | PA1200-2 | |||
NOTES:
* All helm designs can be used
** Refer to application guides
*** Refer to measuring hose distance
NOTICE:
Front Mount Cylinder part# HC5345-3 is included in the SeaStar Outboard Steering Kits HK6400A-3/HK63xxA-3. If your engine requires the use of a cylinder other than the HC5345-3 (see application guides on pages 3-5 through 3-6) you will need to purchase the individual components (helm, cylinder, hoses, etc.) separately.
APPLICATION GUIDE – Single Engine (Normal Use)
Prior to selecting a cylinder from this application guide, please refer to our order guide to ensure that you are selecting the correct cylinder for your engine/boat.
| ENGINE MANUF. | YEAR | MODEL | CYLINDER | NOTES |
| Honda | 1996 TO DATE | 75-90HP | HC5345-3 | |
| 1998 TO 2009 | 115-130HP | HC5347-3 | ||
| 1998 TO DATE | 30-50 HP | HC5345-3 | See Note 1 | |
| 2001 TO DATE | BF150 | HC5345-3 | See Note 3 | |
| 2001 TO DATE | BF200-500 | HC5445-3 | ||
| 2003 TO DATE | BF135 HP | HC5345-3 | ||
| 2010 TO DATE | 115 HP | HC5345-3 | ||
| 2015 TO DATE | BF100 HP | HC5345-3 | ||
| Johnson / Evinrude | 1991 TO DATE | 40-300HP | HC5345-3 | Inc. ETech |
| 1997 TO 2006 | 75 – 300 HP Ficht | HC5345-3 | ||
| 1998 TO DATE | 40-140 HP 4-Stroke | HC5358-3 | See Note 1 | |
| 2000-2003 | 115 HP Ficht | HC5358-3 | See Note 1 | |
| 2002 TO DATE | 200-225 HP 4-Stroke | HC5345-3 | ||
| 2007 TO DATE | 3.3L V6 200-250 HP | HC5345-3 | Inc. H.O. Models | |
| Mercury | 1989 TO DATE | 75-300 HP | HC5345-3 | |
| 1998 TO DATE | 30-60HP | HC5348-3 | See Note 1 | |
| 2003 TO DATE | 150-300HP XS | HC6345-3 | ||
| 2004 TO DATE | 150-200HP VERADO | HC5345-3 | ||
| 2017 TO DATE | 175-200-225 HP 3.4L V6 | HC5345-3 | ||
| 2018 TO DATE | 250-300 HP 4.6L V8 | HC5345-3 | See Note 2 | |
| Oxe | 2017 TO DATE | 200 HP Diesel I4 2.4L | HC5345-3 | |
| Selva | 2000-2013 | 90-115 HP | HC5358-3 | |
| 2014 TO DATE | 115 HPE | HC5345-3 | ||
| 2000 TO DATE | 150 HP | HC5345-3 | ||
| 2007 TO DATE | 200-300 HP 4.2L V6 | HC5345-3 | ||
| Tohatsu | 1990 TO DATE | 40-140 HP | HC5345-3 | |
| 2014 TO DATE | BFT60-BFT150 | HC5345-3 | ||
| 2014 TO DATE | BFT200-BFT250 | HC5445-3 | ||
| Suzuki | 1986 TO 2000 | DT-100HP | HC5345-3 | |
| 1998 TO DATE | 40-140 HP 4-Stroke | HC5348-3 | See Note 1 | |
| 1986 TO 2002 | 115-140HP | HC5345-3 | NOT 1996 | |
| 1986 TO 2013 | 150-225 HP 2 & 4-Stroke | HC5345-3 | ||
| 2004 TO DATE | DF200-300 HP 3.6-4.0L V6 | HC5345-3 | ||
| 2013 TO DATE | 150-200 HP 4 Cylinder | HC5358-3 | ||
| 2017 TO DATE | DF325-359 HP 4.4L V6 | HC5345-3 | ||
| Yamaha | 1990-2007 | 40-90 HP 2-STROKE | HC5345-3 | See Note 1 |
| 1986-DATE | 100-300 HP 2-STROKE | HC5345-3 | ||
| 2000-DATE | 150-300 HPDI | HC5345-3 | ||
| 2003-DATE | 25-70 HP 4-Stroke | HC5348-3 | See Note 1 | |
| 2007-DATE | 200-300 HP 4.2L V6 4-Stroke | HC5345-3 | ||
| 2007-DATE | F300-F350 HP 5.3V8 | HC5345-3 | See Note 3 | |
| 2011 TO DATE | F115A inc. SHO 90 & 115 HP | HC5358-3 | ||
| 2012 TO DATE | 150-200 HP 2.8L 4 Cyl. | HC5345-3 | ||
| 2014-DATE | F115B | HC5345-3 |
NOTES:
1. Requires spacer kit HO5090.
2. PRO XS MUST use HC6345-3
3. Optional cylinder part # HC5358-3. Slight interference may occur when using the HC5358-3, with the engine in the full tilt position.
NOTICES:
High Strength Tiller bolt, part# HA5822. ALL cylinders shipped after June 15th, 2007 will have this bolt included in the cylinder package.
Front Mount Cylinder part# HC5345-3 is included in the SeaStar Outboard Steering Kits HK6400A-3/HK63xxA-3. If your engine requires the use of a cylinder other than the HC5345-3 (see application guides) you will need to purchase the individual components (helm, cylinder, hoses, etc.) separately.
CAUTION:
SeaStar Solutions® recommends the use of SeaStar PRO (1500 psi) Kevlar steering hoses with SeaStar PRO Helms.
…………………………………………………………………………………………………………………………….
APPLICATION GUIDE – Twin Engine (Normal Use)
Prior to selecting a cylinder from this application guide, please refer to our order guide to ensure that you are selecting the correct cylinder for your engine/boat.
| ENGINE MANUF. | YEAR | MODEL | CYLINDER | TIE BAR KITS | NOTES | |
| Twin Engine Single Cyl. | Twin Engine Dual Cyl. | |||||
| Honda | 1996 TO DATE | 75-90HP | HC5345-3 | HO6001 | HO6002 | See Note 3 |
| 1998 TO 2009 | 115-130HP | HC5347-3 | HO5063 | HO5064 | See Note 5 | |
| 1998 TO DATE | 30-50HP | HC5345-3 | HO6001 | HO6002 | See Note 2 | |
| 2001 TO DATE | 150HP 4-STROKE | HC5345-3 | HO6001 | HO6002 | See Note 8 | |
| 2001 TO DATE | BF200-250 | HC5445-3 | HO6001 | HO6002 | ||
| 2003 TO DATE | BF135 HP | HC5345-3 | HO6003 | HO6002 | ||
| 2011 TO DATE | 115 HP | HC5345-3 | HO6003 | HO6002 | ||
| 2015 TO DATE | BF100 | HC5345-3 | HO6003 | HO6002 | See Note 7 | |
| Johnson / Evinrude | 1991 TO DATE | 40-300HP | HC5345-3 | HO6003 | HO6002 | Inc. ETech Engines |
| 1996 TO DATE | 75-250HP Ficht | HC5345-3 | HO6003 | HO6002 | ||
| 1998 TO DATE | 40-140 HP 4-STROKE | HC5358-3 | HO6003 | HO6002 | See Note 2 | |
| 2000 TO DATE | 115HP Ficht | HC5358-3 | HO6003 | HO6002 | See Note 2 | |
| 2002 TO DATE | 200-225 HP 4-STROKE | HC5345-3 | HO6003 | HO6002 | ||
| 2005 TO DATE | E250 DPX VINDICATOR | HC5348-3 | HO6003 | HO6002 | ||
| 2007 TO DATE | 3.3L/3.4L 200-250 HP | HC5345-3 | HO6003 | HO6002 | Inc. H.O. Models. | |
| Mercury | 1989 TO DATE | 75-300 HP | HC5345-3 | HO6001 | HO6002 | See Note 3 |
| 1996 TO DATE | 75-200 HP 2 & 4-STROKE | HC5345-3 | HO6001 | HO6002 | See Note 8 | |
| 1998 TO DATE | 30-60 HP | HC5345-3 | HO6001 | HO6002 | See Note 2 | |
| 2002 TO 2003 | 225 HP 4-STROKE | HC5358-3 | HO6001 | HO6002 | See Note 1 | |
| 2004 TO DATE | 150-200 HP VERADO | HC5345-3 | HO6001 | HO6002 | ||
| 2003 TO DATE | 150-200 XS | MUST Use Tournament Cylinders.Contact tech. support for details. | ||||
| 2003 TO DATE | 250-300 HP XS | MUST Use Tournament Cylinders.See Selection Guide, page 3-11. | ||||
| 2016 TO DATE | 150 HP 3.0L 4-Stroke | HC5435-3 | N/A | HA5520 | See Note 9 | |
| 2017 TO DATE | 175-225 HP 4-Stroke 3.4L V6 | HC5435-3 | HO6001 | HO6002 | ||
| 2018 TO DATE | 250-300 Pro XS 4-Stroke 4.6L | HC6345-3 | HA5521 | HA5520 | See Note 9 | |
| Oxe | 2017 TO DATE | 200 HP Diesel I4 2.4L | MUST Use Tournament Cylinders.See Selection Guide, page 3-11. | |||
| Suzuki | 1986 TO DATE | 100 HP | HC5345-3 | HO6003 | HO6002 | |
| 1986 TO 2002 | 115-140HP | HC5345-3 | HO6001 | HO6002 | NOT 1996 | |
| 1986 TO 2015 | 150-300 HP 2 & 4-Stroke | HC5345-3 | HO6003 | HO6002 | ||
| 1998 TO DATE | 40-140 HP 4-Stroke | HC5358-3 | HO6003 | HO6002 | See Note 2 | |
| 2003 TO DATE | 90 HP 4-Stroke | HC5358-3 | HO6003 | HO6002 | See Note 2 | |
| 2013 TO DATE | DF150 – DF175 HP | HC5345-3 | HO6001 | HO6002 | ||
| 2017 TO DATE | DF325-350 HP 4.4L V6 | MUST Use Tournament Cylinders.See Selection Guide, page 3-11. | ||||
| Yamaha | 1990 TO 2007 | 40-90 HP 2-Stroke | HC5345-3 | HO6003 | HO6002 | |
| 1986 TO DATE | 100-250 HP 2-Stroke | HC5345-3 | HO6001 | HO6002 | ||
| 2000-DATE | 150-300 HPDI | HC5345-3 | HO6001 | HO6002 | ||
| 2001 TO 2003 | 80-250 HP 4-Stroke | HC5358-3 | HO6001 | HO6002 | See Note 1 | |
| 2003 TO DATE | F150-F250 3.3L | HC5358-3 | HO6001 | HO6002 | ||
| 2003 TO DATE | 25-70 HP 4-Stroke | HC5348-3 | HO6003 | HO6002 | See Note 2 | |
| 2007 TO DATE | 200-300 HP 4.2L V6 4-Stroke | HC5345-3 | HO6001 | HO6002 | ||
| 2007 TO DATE | F300-F350 HP 5.3V8 | MUST Use Tournament Cylinders.See Selection Guide, page 3-11. | ||||
| 2011 TO DATE | F115A inc. SHO 90 & 115 HP | HC5358-3 | HO6003 | HO6002 | ||
| 2014 TO DATE | F115B | HC5345-3 | HO6001 | HO6002 | ||
NOTES:
1. HC5345-3 is optional for SINGLE ENGINE ONLY applications. DO NOT use HC5345-3 for Twin engine applications as operational interference may occur.
2. Requires kit HO5090.
3. Minimum engine center = 27″.
4. May require extensive cowling modifications.
5. HO5030 and HO5064 comes without tie-bar.
6. One cylinder per engine. Must use Mercury supplied tiller bolt for installation.
7. Customer Supplied SS washer must be installed under rod end
8. Slight interference may occur with HO6001 tie bar, contact SeaStar Solutions technical support.
9. Refer to table in our Selection Guide, page 3-5 for tie bar part number.
NOTICE:
HO6001, HO6002 and HO6003 are for engine centers up to 36″. For wider engine centers please contact SeaStar Solutions Technical Support.
![art-x342-kit-for-honda-and-yamaha-engines[1]](https://bootslenkung.de/wp-content/uploads/2019/09/art-x342-kit-for-honda-and-yamaha-engines1-247x247.jpg)
